TEXA Konfort 700R Series, Technical Manual

Page: 56 / 86

11 User Instructions
This chapter provides various general instructions on how to use the device.
11.1 How to Connect to the Vehicle Air Conditioning System
In order to carry out A/C system recharging operations you are required to
connect the device to the vehicle.
Proceed as follows:
1. Place the device near the A/C system you wish to check.
2. Connect the service tubes to the vehicle A/C system.
11.2 Visual Warnings
The control panel/display on the device has a series of LEDs that provide
information on the status of the device and on the phase in progress at a specific
time.
Name -
Symbol
Colour Indicates Blink Code
GAS
Orange
R134a is being
used
ON: refrigerant is being used.
OFF: device is turned off.
Green
Using the
refrigerant
R1234yf
Blue Bluetooth activity
Flashing: Bluetooth communication in
progress.
Off: no Bluetooth communication.
REC Green Recycling Phase
ON: phase selected or complete.
Flashing: phase being selected or
carried out.
OFF: phase not carried out.
VAC Blue Vacuum Phase
INJ Orange Injection Phase
REF Red
Recharging
Phase
11.3 Audible Warnings
The control panel/display on the device has an electronic buzzer.
The operator is informed of any errors or warnings regarding the service, not
only via messages that appear on the display, but also via a "beep".
56