TEXA Konfort 700R Series, Technical Manual

Page: 14 / 86

2.2 General Rules
• The operator must have basic knowledge within the refrigeration field,
refrigeration system, as well as knowledge of refrigerants and of the potential
hazards that devices under extreme pressure can cause.
• The operator must have fully read and understood the information and the
instructions described in the technical documentation provided with the device.
2.3 Operator Safety
The refrigerant liquids can cause blindness and other physical damage.
Due to their low boiling temperature (approximately - 30 °C), the
refrigerants can cause cold burns when they come into contact with the
skin.
Safety Measures:
• The operator must avoid inhaling the vapours of the refrigerant liquids; use
appropriate protection when required.
•
The operator is required to wear adequate safety glasses and gloves, that prevent
direct contact with the refrigerants.
The equipment has been designed to be steady both when being
moved and once it is positioned.
However, you must pay attention while moving it.
Safety Measures:
•
Do not tilt the equipment in any way.
•
Do not step on the equipment.
• Do not hang loads that may compromise the stability of the equipment, causing
it to tip over.
•
Make sure the equipment is steadily positioned on the ground on its four wheels
whenever it does not need to be moved.
• Avoid moving it on uneven surfaces.
2.4 Device Safety
The equipment was designed in accordance with the regulations about
pressure equipment and assemblies, evaluating and reducing the risk
where present and making appropriate considerations.
However, vibrations, pressure variations or excessive temperatures,
especially if cyclic, should be avoided.
Safety Measures:
14