TEXA Konfort 700R Series, Technical Manual

Page: 62 / 86

14 MAINTENANCE
This chapter describes the maitenance operations required for the device.
Carefully follow the instructions provided in this manual.
Only use original spare parts or approved by TEXA.
For more information contact the post-sales assistance service.
14.1 Ordinary Maintenance
Scheduled maintenance is made up of a series of operations that must be
carried out periodically.
Specific messages will appear on your display each time a maintenance
operation has expired and needs to be carried out.
Maintenance operation Frequency
Dryer Filter Replacement When prompted by the device.
Mechanical Filter Replacement Along with the dehydrator filter replacement.
Vacuum pump oil replacement When prompted by the device.
Printer paper replacement* each time the paper runs out.
(*) Only for780R charging stations or for charging stations on which the optional
printer kit has been installed.
The maintenance operations that require you to open the service
door / bulkheads and to remove parts of the equipment must be
carried out with the equipment switched off.
KONFORT 720R / 760R / 760R BUS / 780R BI-GAS
Following is the procedure for opening the service door correctly on the models:
•
720R
•
760R
•
760R BUS
• 780R BI-GAS
Proceed as follows:
62