TEXA Konfort 700R Series, Technical Manual

Page: 63 / 86

1.
Go behind the device.
2.
Locate the service flap.
3. Lift the opening lever.
4. Turn the lever clockwise.
5. Open the service flap.
KONFORT 710R / 710L
Following is the procedure for opening the service bulkheads correctly on the
models:
•
710R
•
710L
•
712R
The procedure is the same for both the service bulkhead that allows you to
access the filter and for the one that allows you to access the vacuum pump.
Proceed as follows:
1.
Go behind the device.
2.
Locate the service bulkhead to remove.
3. Loosen the four screws that block the bulkhead using an hexagonal wrench n° 3.
4. Remove the bulkhead.
KONFORT 707R / 705R / 705 OFF ROAD
Following is the procedure for opening the service bulkheads correctly on the
models:
• 705R
• 705R OFF ROAD
• 707R
In order to carry out the charging station maintenance operations described
above, you must remove the front shield.
Proceed as follows:
1.
Go behind the device.
2.
Using a n° 3 hexagonal wrench remove the four screws that fasten the front cover
to the body of the machine.
3. Stand in front of the recharging station.
4. Using a n° 3 hexagonal wrench loosen the two screws that fasten the front cover
to the top cover.
5. Lift the top cover slightly.
6. Remove the front cover.
63
en