11
• POWER HIFI
Setup
You can find comprehensive notes and tips for
correct setup on our website.
Setup location
CAUTION
The total system weighs 60 kg.
–
Make sure that the floor has the required
load-bearing capacity.
–
Only carry/transport the individual compo-
nents –
never
the entire system stacked
on top of one another.
NOTICE
Risk of damage! The isolation pads can
produce discolouration on sensitive
surfaces.
–
On parquet, varnished wood and similar
surfaces, you should stick felt gliders to
the rubber feet of the speakers or put
blankets or small carpets under them. This
will prevent discolouration of the floor over
the long term.
• Select a stable, level base.
• Make sure that the environment is clean and free
from dust.
• Ensure sufficient ventilation.
• Select a location away from heat sources and
prolonged exposure to direct sunlight.
• Always place the components on top of one another
in this order: Bass speaker on the bottom, then the
mid-range speaker and the high-range speaker with
the control unit on the top.
• Make sure that the feet of the top components are
positioned directly in the recesses in the underlying
housing.
• Lay the connector cords so that they do not pose a
tripping hazard.
• Do not place any heavy objects on the cables or the
speakers.
• Do not place open flames such as burning candles
or similar on the speakers.
• Do not place any containers with liquids such as
vases, beverages or similar on the speakers.
• Depending on the set-up location, it may make
sense to angle the speakers towards the listening
position. You should definitely try this to determine
whether it noticeably improves the sound.
