30
• Impaq 8000
Radio Mode
The radio is capable of receiving mono and stereo
stations in the USW range from 87.5 to 108 MHz, RDS
mode is also possible.
Push the RADIO button
(35)
to activate radio as
source.
Setting the radio stations
Set the receiving frequency with the navigation but-
tons
◀▶
(25)
:
– Automatic: Pushing the button for approx. one
second initiates station scanning in the desired
direction (then release the button) until the radio
turns to the next station with sufficient transmis-
sion power.
– Manual: Each time you tap the button, the frequen-
cy will be increased or decreased by 0.05 MHz.
The selected frequency will appear on the display
(4)
and on the screen.
If the station transmits an RDS signal, the name
of the station and, if applicable, the radio text will
appear on the display
(4)
and screen after a few
seconds – you may first have to push the
INFO/RDS
button (40)
for this. The program type will also be
displayed on the connected screen.
With the
INFO/RDS button (40)
, you can switch the
display with the RDS information on the bottom line of
the display
(4)
between radio text and the programme
type (PTY) or completely switch RDS off – the top
line will then show the station memory number (if it
has been selected) and the bottom line will show the
station frequency.
In stereo mode, you may experience noticeable noise
with weak stations. In this case, you switch to mo-
no-mode by pushing the
ZOOM/
button (42)
.
4
25
26
40
41
35
23
22
51
53
42
LIP SYNC
SUBTITLE
REPEAT
MEMORY
RDS
INFO
LEVEL
TONE
TV /ARC)
RADIO
SURROUND
SOURCE
VOLUME
1
2
3
4
5
6
7
8
0
9
OSC
SEARCH
CLEAR
