12
• Impaq 8000
Setup
Setup location
NOTICE
If the device is subjected to warm tempera-
tures after being cold (e.g. after transport),
condensation may occur inside of it.
–
In this case, wait at least 2 hours before
you connect and activate it.
You can find extensive information describing
correct setup on our website.
Location tips
• Select a stable, level base.
• Make sure that the environment is clean and free
from dust.
• Select a location away from heat sources and direct
sunlight.
• The device should have approx. 10 cm of clearance
on all sides to ensure adequate circulation of air.
• Lay the connector cords so that they do not pose a
tripping hazard.
• Do not place any heavy objects on the cable or the
devices.
Setting up the speakers
TV
Stereo triangle
Front
Front
Center
Surround
Surround/rear
Surround/rear
Surround
Subwoofer
(a)
(a)
(b)
(b)
Center speaker
Place the center speaker in a central position direct-
ly under the screen or ideally on a circular arc that
is slightly curved towards the screen. You can also
mount some speaker models directly on the wall
using the keyhole opening on the rear panel.
Front speakers
The front speakers are set up or hung to the right and
left of the screen.
The speakers should be in line with the center speak-
er and form an equilateral triangle with the listener
– the so-called stereo triangle (distance from the
listener = distance between the speakers).
The speakers should project sound directly into the
room or slightly towards the listener.
Surround speakers
The surround speakers are setup or hung to the side
(a) or back (b) of the listener at a height of 1.20 m to
2.10 m.
There should be at least 100 cm distance to the
listener.
Subwoofer
The location of the subwoofer can be freely selected
and does not influence the other speakers. However,
do not set it up in the corner of the room as this may
result in uncontrollable frequency rises. A location
between the front speakers is often ideal.
Rear speakers
To set up a 7.1 system, the Impaq 8000 can emit
the rear channels via the jacks 20 “AUX OUT /
RC PRE OUT”. You can connect an external stereo
amplifier, active speaker or radio system to it. Then
the speakers are mounted behind (b) or above the
viewers.
