15
• Cinebar Ultima
Wall mounting
Proceed with care when mounting the
Cinebar Ultima on the wall and follow
the instructions below.
You will need the following material
to mount the product on a solid stone
wall (not included in the package
contents):
• 2 dowels (ø 6 mm)
• 2 screws, 5 × 55 mm, screw head
ø 9–12 mm
CAUTION
Risk of injury/damage!
–
Only qualified persons may
mount the Cinebar Ultima on
the wall.
–
The device may only be
mounted on a suitable,
solid wall. Special dowels or
anchors may be necessary
when mounting the product
on lightweight walls. Consult
a qualified professional in
this case.
–
Make sure that there are no
cables or pipes in the drilling
areas. Before you drill, use a
metal detector to check the
applicable areas. Otherwise,
there is a risk of electric
shock/short circuit!
1. Space the two keyhole openings
(13)
in the wall where you would
like to mount the Cinebar Ultima at
a distance of 60 cm apart. Use a
ruler, pencil and spirit level for this.
2. Use a metal detector to check the
drill areas. If necessary, select
another area for mounting.
3. Use an 6 mm rock drill to drill
holes, which are approx. 55 mm
deep, at the marked positions.
4. Insert 2 dowels (ø 6 mm) all the
way in the drill holes.
5. Screw one screw (5 × 55 mm)
into each dowel until there is
approx. 3-4 mm of space between
the wall and the screw head.
(13)
(13)
60 cm
6. Press the Cinebar Ultima up against
the wall so that the screws vanish
in the keyhole openings
(13)
.
7. Now pull the Cinebar Ultima down
so that the screws slip into the
small slot.
8. If applicable, screw the screws
further in or out until the
Cinebar Ultima is securely mounted
on the wall.
