19
• Cinebar Ultima
Selecting a source
–
Select the source by pushing the
button
(9)
repeatedly.
Use these buttons to select the
source directly:
• HDMI
(29)
: HDMI IN jack
(18)
• AUX
(30)
: AUX IN jacks
(14)
• OPT • USB
(32)
:
Short Press: OPTICAL IN jack
(16)
Long Press (3-4 sec.) USB jack
(15)
• BLUETOOTH
(33)
: Bluetooth
®
connection
• TV
(34)
: TV sound via HDMI ARC,
OPTICAL IN or AUX IN
The selected source will appear in the
display
(20)
.
Adjusting the volume
The volume setting of an
external player often affects the
volume of the Cinebar Ultima.
• Push the button
(10)/(24)
to decrease and the button
(12)/(23)
to increase the volume.
The display
(20)
shows the current
value while making the setting.
• In HDMI mode, the volume can
also be adjusted with the remote
control of the TV set.
Mute
–
By tapping the
button
(22)
, you
can switch the sound off and back
on. The word “MUTE” will appear
on the display
(20)
during muting.
–
The volume can also be adjusted to
activate the sound.
Adjusting the sound
You can adjust the sound in two
ranges:
•
BASS
– low tones, set with the
BASS button
(35)
.
•
TREBLE
– high tones, set with the
TREBLE button
(27)
.
1. Push the corresponding button.
The selected range “Bass” or
“Treble” will appear briefly on the
display
(20)
. Afterwards, you will
see the current setting.
2. Set the desired value within a
range from “–10 dB” (decrease)
to “+10 dB” (increase) with the
buttons
+
(23)
and
–
(24)
.
3. Finish by pushing the button
(37)
.
–
The device will return to normal
operation after three seconds of
button inactivity.
You can also make the same setting
on the menu (see page 22).
Equalizer
Push the button MODE
(28)
to select
the predefined sound patterns:
•
Normal
: Unchanged sound.
•
Voice
: Clear sound for messages
and magazines.
