CHAPTER 5
PROTOCOL AND OPERATIONAL WORK
5-2
Displays of series DN-109NN, DN-119NN, DN-129NN and DN-189NN
PROFINET protocol.
In this section we will describe the configuration and commissioning of the Profinet
Display using the engineering tool TIA Portal V13 by Siemens. In the case of using another
engineering tool you must consult the corresponding documentation.
Before the configuration.
As each PROFINET device is based on DNS (Domain Name System) and the
conventions for the denomination of equipment connected to network, it is necessary to assign
an identification name to the Display (Device Name). Device Name is assigned to the device
through a PROFINET tool that it can be from an engineering tool such as TIA Portal or an
independent tool.
In our Displays we use an independent tool called SW67602
1
which can be downloaded
freely from our website and it allows you to edit the Device Name and other Ethernet network
parameters like IP address, network masks, etc.
When done, you must generate the new GSD file and update the display with the new
configuration.
Let’s see when it is mandatory to change GSD:
1. In the Profinet network there is only a DN-NN family display.
The display is always configured at factory with a default Device Name, according
to the equipment model.
For example: If we have a DN-109 of 4 characters one side (our reference DN-
109/4S) the Device Name assigned is dn1x9. This device name includes all the
options of our Profinet numeric displays.
In installations with only one Display of the DN-NN family, it is recommended to
use the factory configuration, downloading the GSD with the default configuration
from our website and configure TIA Portal as it is described at the section 5.1.4
2. The Profinet network has more than one DN-NN family Display.
In the case you want to install more than one numerical display on the same
Profinet network it is mandatory to change device name of at least one of it.
Please use the tool provided.
The procedure for using the configuration application SW67602 is described in
the section 5.1.3.
1
It runs in Operating System MS Windows (XP.Vista,7,8,10)
