CHAPTER 5
PROTOCOL AND OPERATIONAL WORK
5-7
Displays of series DN-109NN, DN-119NN, DN-129NN and DN-189NN
3. Add displays and PLC to the Profinet Network
Connect the displays to the PLC by drawing the Ethernet wire joining the display ports
with the PLC Port.
Select each one of the displays modules included and assign the IP (1) which they will
have in the Profinet network. The
“
Device view
”
will be displayed
double clicking
in a
particular display
.
4. Assign the E/S address space.
In the
“
Device view
”
field,
check that the
“
Name
” (1) matches with the “Device Name”
assigned to the device (TIA Portal add the suffix _1,
2… to avoid duplicity). If the name is
different to the one programmed into the Display, rename it to match with the programmed.
Fig. 9 Define the Displays connection with PLC
Fig. 10 Assign the E/S addresses of the devices.
