background image

CHAPTER 2 

GENERAL CHARACTERISTICS 

2-2 

 

Displays of series DN-109NN, DN-119NN, DN-129NN and DN-189NN 

Displays de las series DT-203X, DT-105X y DT-110X 

 

 

 

Electrical characteristics of the DN-129 displays. 

Supply Voltage........................................... 100 a 240 VAC   50/60Hz. Option 24VDC. 
Consumption ............................................. See section 2.2. 
Display  ....................................................... 7 segments of 250 mm  decimal point. 
 ..................................................................... Red LED color. Reading distance 120 meters. 
Text (Vinyl)  ................................................ White vinyl. 
Parameter memory .................................... Eeprom. 
Environmental Conditions ........................ Operation temperature: -20 to 60ºC. 
 ..................................................................... Storage temperature: -30ºC to 70ºC. 
 ..................................................................... Humidity: 20-90% HR without condensing. 
 ..................................................................... Maximum environmental illumination: 1000 lux. 
 ..................................................................... Sealing: IP41. 

 

 

Summary of Contents for DN-109NN Series

































Reviews: