DN-107NE display series
4-4
OPERATION
CHAPTER 4
If the configuration of the port has been modified and the factory parameters cannot be
reset, this parameter can be used to load them.
To load the factory parameters, value 99 must be input and the advance key “*” pressed.
During the parameter loading time, the three digits are displayed flashing. When finished,
parameter 6 is displayed.
wished.
In order to exit parameter configuration, press the key “*”.
Before exit the parameters are saved.
If you wish continue modifying parameters, press the key “+” until arrive parameter
4.2.3.6. Parameter 6: Load the default configuration to the port
4.2.3.7. Parameter F
