DN-107NE display series
CHAPTER 4
OPERATION
4-13
To define the colour the 2 internal bits (r1 and r2) are used.
The following parameters are used to define colours.
Colour if internal bits are OFF. To change the colour press * key. Upon pressing
+ the next parameter is shown.
Colour if internal bit r1 is ON. To change the colour press * key. Upon pressing
+ the next parameter is shown.
Colour if internal bit r2 is ON. To change the colour press * key. Upon pressing
+ the next parameter is shown.
Colour if internal bits r1 and r2 are ON. To change the colour press * key. Upon
pr the next parameter is shown.
To work always with only one colour set up the following parameters:
Parameter
Value
b
20
C
0
d
20
E
0
nr
colour
r1
colour
r2
colour
r3
colour
Parameters C and E may have any value.
Parameters nr, r1, r2 and r3 should have the same colour.
Independently of work colour, the parameters set up always uses RED colour.
4.6.4. Work with only one colour.
4.6.3. Parameters to define the colour.
