TETRALEC DN-107NE, Operation Manual

Page: 16 / 23

DN-107NE display series
4-8 OPERATION CHAPTER 4
Identifier Protocol
Number of
bytes
Unit Function
Start Address
00h 24h 00h 00h 00h 0Fh 01h 10h 00h 00h
In this example the visualized value is: 46713098.
Response from the display:
The response from the display is the same block received from the identifier until the
number of registers.
Identifier Protocol
Number
of
bytes
Unit Function Start Address
Number of
registers
00h 24h 00h 00h 00h 0Fh 01h 10h 00h 00h 00h 04h
Example 2
Identifier Protocol
Number of
bytes
Unit Function
Start Address
00h 24h 00h 00h 00h 0Fh 01h 10h 00h 00h
Number of Number of
Data
registers bytes
In this example the visualized value is: 4268,3.
Numerical displays can only display numbers and some characters. All valid characters
and their representation in hexadecimal format are shown below.
Character 0 1 2 3 4 5 6 7 8 9 A B
HEXA 30h 31h 32h 33h 34h 35h 36h 37h 38h 39h 41h 62h
DEC 48d 49d 50d 51d 52d 53d 54d 55d 56d 57d 65d 98d
Character C c d E F H h i J L n O
HEXA 43h 63h 64h 45h 46h 48h 68h 69h 4Ah 4Ch 6Eh 6Fh
DEC 67d 99d 100d 69d 70d 72d 104d 105d 74d 76d 110d 111d
Character P r U u , . - _
‘
¯ =
Hexa 50h 72h 55h 75h 20h 2Ch 2Eh 2Dh 16h 27h 28h 3Dh
DEC 80d 114d 85d 117d 32d 44d 46d 45d 22d 39d 40d 61d
For a character or group of characters to be displayed, flashing codes 08h(Start) and 09h(End)
must be used.
4.3.4. Valid Characters
Number of
registers
Number of
bytes
Data
00h 04h 08h 34h 36h 37h 31h 33h 30h 39h 38h
00h 03h 06h 34h 32h 36h 38h 2Eh 33h