20
At the end of their device lifecycle, the heat pumps will be disposed of in conformity with the applicable regulations.
WARNING! This equipment contains greenhouse fluorinated gas included in the Kyoto protocol. The
maintenance and disposal operations must only be carried out by qualified personnel. This device con
-
tains R513a refrigerant in the amount as stated in the specification. Do not vent R513a into the atmo
-
sphere: R513a, is a fluorinated greenhouse gas with a Global Warming Potential (GWP) = 631.
INFORMATION TO USERS:
Pursuant to EU Directives 2011/65/EU (RoHS), 2012/19/EU (WEEE), relating to the reduction of the use of hazardous
substances in electric and electronic equipment as well as waste disposal.
The symbol of the barred wheelie bin that can be seen either on the equipment or its packaging indicates that the device
must be collected separately from other waste at the end of its lifecycle.
At the end of the device lifecycle, the user must therefore take the equipment to suitable separate collection centers for
electronic and electro-technical waste, or to return it to the dealer upon purchasing another equivalent device, at the
ratio of one to one.
The adequate separate waste collection relating to the subsequent sending of the discontinued equipment for recycling, treatment
and/or environmentally-compatible disposal, contributes towards avoiding possible negative effects on both the environment and
health; it also encourages the reuse and/or recycling of materials of which the equipment is made.
The unlawful disposal of the device by the user leads to the application of the administrative penalties foreseen by applicable legis-
lation.
The main materials that are used in the production of the equipment are as follows:
• Steel;
• Magnesium;
•
Plastic;
• Copper;
• Aluminum;
•
Polyurethane.
WARNING! In the event that the operator does not succeed in solving the problem, switch off the equip
-
ment and seek technical assistance specifying the device model purchased.
When remote signal is on, no P7 will be showed on the controller, when remote signal is off, P7 will be
displayed. It is not an error code, but a situation for remote on/off signal.
11. DISPOSAL
Summary of Contents for HPWH 3.1 200 U02
Page 2: ......
