Shenzhen TestPad Electronic Co., Ltd.
http://www.test-pad.com
10
If the ID of a MOTO mobile phone needs be tested separately, simply connect the terminal of the
ID to the ID terminal, and use a separate wire to connect the P- of the battery to the P- terminal of
the tester.
If the capacity of Nickel-Metal hydride battery or Nickel-Cadmium battery needs be tested or
these two types of batteries need be charged, our delivery-attached temperature sensor is required.
Place the temperature sensor close to the surface of the battery to be tested, and connect the
temperature sensor to the P- and R2 of the tester. Then the tester can monitor the temperature of
the battery, thus to better judge the condition of the battery and ensure safe charge.
