Important safetyinformation
6
Installation
•
Always completely disconnect the relevant plant part before install-
ing the instrument or connecting/disconnecting it to/from the power
supply. Secure the plant against reconnection.
•
Only connect the instrument to the mains voltage specified on the
rating plate.
•
Always observe technical data and ambient parameters.
•
Testomat 2000
®
THCL requires an interference free and stable
power supply. If necessary, use a mains filter to protect Testomat
2000
®
THCL against interference voltages caused, e.g., by sole-
noid valves or large motors. Never lay connecting cables parallel to
power cables.
Operation
•
Ensure that the maximum electrical load capacity of the relay out-
puts is never exceeded.
•
Immediately switch off Testomat 2000
®
THCL and contact service
staff if malfunctioning occurs. The warranty will be void if you tam-
per with or attempt to repair Testomat 2000
®
THCL. Repairs must
be carried out by authorised service staff.
Cleaning
•
Only use a dry, lint-free cloth for cleaning.
De-installation
•
Prior to de-installing a defective instrument, always write down a
description of the error (failure effect). It is only possible to repair a
defective instrument (irrespective of the warranty period) if it has
been de-installed and returned to us with a description of the error.
Disposal
•
Dispose of the instrument in accordance with national regulations.
WARNING
!
HINWEIS
