TESTO 6383, Instruction Manual

Page: 51 / 88

4 Transmitter
51
Message Display Description
01D19 Service plug The Mini-DIN socket is connected
to: the USB adapter for P2A
software, the adjustment adapter
or the service plug (is not
recorded/no number)
00300 New limit value The limit value has been changed
or shifted
00301 Scaling changed The scaling has been changed
00117 Adjustment DeltaP An n-point adjustment was
performed.
02104 Analog adjustment An analog adjustment has been
made
00530 Change solenoid
valve The solenoid valve should be
changed
00500 Transmitter reset The transmitter was reset to the
factory settings and is restarted.
0052F Reset Min/Max Resets all saved Min/Max values
for all channels
00503 Reset device to
fact A factory reset of the transmitter
was performed
00307
User Setting
Change User Setting Change: General
settings were changed for the
transmitter.
4.5.2. Warning messages
Warning messages show an early warning or a current malfunction
which may negatively impact measuring.
Message Display Cause Remedying of fault
00E00 T ambient high The ambient
temperature exceeds
the permissible
temperature for the
transmitter
Take necessary
measures to lower
ambient temperature,
e.g. through venting or
cooling
00E01 T ambient low The ambient
temperature is below
the permissible
temperature for the
transmitter Take necessary
measures to raise
ambient temperature,
e.g. through heating