TESTO 6383, Instruction Manual

Page: 49 / 88

4 Transmitter
49
4. Press SET . Read off multimeter display and enter this value in
the user menu. Do this by scrolling one digit to the right using

and increasing the value of digit by 1 using  . Confirm with
SET or abort entry with ESC .
5. Use  or  to select Adj. Point 2 .
6. Press SET . Read off multimeter display and enter this value in
the user menu. Do this by scrolling one digit to the right using 
and increasing the value of digit by 1 using

. Confirm with
SET or abort entry with ESC .
7. Use

or

to select Adj. Point 3 .
8. Press SET . Read off multimeter display and enter this value in
the user menu. Do this by scrolling one digit to the right using 
and increasing the value of digit by 1 using

. Confirm with
SET or abort entry with ESC .
9. Return to main menu Adjust with ESC .
10. Continue to main menu Reset with

or

or return to
Measuring Mode with ESC .
Performing the pressure adjustment
Also see n-point adjustment, page 36, for instructions on how to
perform the pressure adjustment.
1.
In the Measuring Mode press SET , select main menu Adjust
with  or  and confirm selection with SET .
The pressure adjustment can be performed at 3 to 6
adjustment points.
2. Select Adjust Pressure with  or  and confirm with SET .
3. Use

or

to select Adj. Point 1 .
4. Press SET . Read off pressure sensor display and enter this
value in the user menu. Do this by scrolling one digit to the right
using

and increasing the value of digit by 1 using

. Confirm
with SET or abort entry with ESC .
5. Repeat steps 1 to 4 for adjustment points 2 to 6.
6. Return to main menu Adjust with ESC .
7. Continue to main menu Reset with  or  or return to
Measuring Mode with ESC .
4.4.5.8. Editing Reset main menu
You can reset the factory settings for the following:
• Instrument
•
Min./max. values
Resetting to the factory settings means resetting to the
order specification, i.e. the specific condition at the time of