TESTO 6383, Instruction Manual

Page: 50 / 88

4 Transmitter
50
supply to the customer.
1. In the Measuring Mode press SET , select Main Menu Reset
with  or  and confirm selection with SET .
- Reset Device to factory settings is displayed.
2. Select the setting to be reset using

or

and confirm
selection with SET .
- Reset Completed is displayed.
3. Return to the reset setting with ESC or SET and return to Main
Menu Reset with ESC .
4. Continue to the Main Menu Channel 1 with

or

or return to
Measuring Mode with ESC .
4.5. Status, warning and error messages
To achieve optimum operational reliability (machine availability),
the transmitter shows the following via the user menu or the P2A
software
• Status
messages
• Warning messages
• Error messages
in each case for the testo 6383 transmitter.
All messages are stored in the transmitter with an operating hours
stamp. Use the user menu (see Editing Message main menu, page
47) or the P2A software (see Transmitter history, page 78) to view
the message history.
In the transmitter, the last 60 status messages and the last 120
error and warning messages are stored in a ring memory. There is
no limit in the P2A software.
4.5.1. Status messages
Status messages show the current operating status of the testo
6383.
Message Display Description
02506 Sensor
initialization Message appears while the
transmitter is starting up. If the
message disappears, the
transmitter is ready for operation.