TESTO 330, Instruction Manual

Page: 63 / 84

6 Using the product
63
> [Options] → Show Graphic : The readings are displayed in
form of a line graph.
> [Options] → Alarm Limit : The alarm limits menu is opened.
> [Options] → Edit . Values for adjustable parameters can be
edited.
> [Options] → Sensor detection
:
newly inserted sensor is
detected.
> [Options] → Measurement view : (This function is not available
during a measurement): The redings display menu is opened..
6.2.15. Automatic furnaces
With the help of the readout adapter for automatic furnaces
(0554 1206) status data and error messages can be read out of
compatible automatic furnaces, see also documentation on readout
adapter. The range of data which can be read out depends on the
type of the automatic furnace.
Calling up the function:
1.
Connect the readout adapter to the instrument (PS2 interface)
and to the automatic furnace (use adapter ring if necessary).
2. [ ] → Measurements → [OK] → Automatic Furnace →
[OK] .
- The data are read from the automatic furnace. Depending on
the automatic furnace, the data are updated at the latest every
30 s.
The values are saved in a measuring report or transferred
to a pocket PC / PC, together with the measuring values of
a flue gas measurement.
Reading out current status data:
The current data are displayed after a connection has been set up
to the automatic furnace. The following data are displayed with the
help of symbols:
Component Status ON Status OFF
Air controller
Motor
Valve 1
Valve 2
Flame
Ignition
Oil prewarmer