TESTO 330, Instruction Manual

Page: 57 / 84

6 Using the product
57
> [Options] → Draught measure start/stop : The draught
measurement can be started and ended during a measurement.
5.
6.2.6. CO undiluted
Calling up the function:
✓
A multi-hole probe (0554 5762) must be connected.
> [ ] → Measurements → [OK] → CO undiluted → [OK] .
Performing the measurement:
1. Start measurement: [ ]
- The reading is displayed.
2. Quit measurement: [ ]
Options:
> [Options] → Clipboard : Data are saved to the clipboard.
> [Options] → Delete clipboard : Any data saved to the clipboard
is deleted.
> [Options] → Save : The readings are saved in a record.
> [Options] → Show Graphic : The readings are displayed in
form of a line graph.
6.2.7. Smoke No. / HCT
Calling up the function:
> [ ] → Measurements → [OK] → Smoke No. / HCT → [OK] .
The parameters Smoke No. and Oil derivatives are only
available for oil fuels.
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke pump and entering manually:
1. Select parameter → [Edit] .
2. Enter data or values → [Next] or [OK] .
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke tester testo 308 and transferring wireless:
- The testo 308 must be in data transfer mode ( lights up).
> [Options] → t308 .
- The values recorded by the smoke tester are transferred to the
testo 330.