Multi Station
Vicat Test Apparatus
59
Rod magnet failure?
The rod magnet did not release the drop rod.
7.1 The keys of the handheld unit
Figure 73: handset unit
1. Pressing this key during
start up enters menu to set
positions.
2. When measurements
are interrupted, pressing
this key enters also menu
to set positions.
1. Pressing this key during start up
enters menu to select washer units.
2. Within all other menus: cancel
1. Pressing this key
during start up enters
menu Hardware check
(Only for maintenance
personnel).
2. Switching the sign
of the offset for relative
humidity inside the
menu for relative hu-
midity offset.
Pressing this key dur-
ing start up enters
menu to reject restora-
tion.
1. feature: „yes“
2. during setting posi-
tions: select X-Axis
1. during menu-naviga-
tion:
„no“
2. during setting posi-
tions: select Y-Axis
1. during menu-navigation:
Go back to previous view.
2. during setting positions:
select Z-Axis
1. Pressing this key during start up
enters menu to input parameters for
the humidity sensor (ASTM).
2. Pressing the key inside menu for
humidity parameters moves cursor
back.
3. Pressing this key during setting
positions moves the selected axes
backward.
Pressing this key during start up enters
menu to switch ON/OF the pump for cone
(gypsum).
1. Pressing this key during
start up enters menu to se-
lect sensor.
2. during setting positions:
save value
3. When measurements
are interrupted, pressing
this key enters menu for
setting the penetration time
(only for programs with ex-
tension .OCT or
.OCT_EXTW).
1. Press during start up to
move to maintenance posi-
tion.
2. Pressing this key during
setting positions moves the
selected axes forward.
3. Pressing the key inside
menu for humidity parame-
ters moves cursor forward
.
Pressing this key during
start up enters menu to de-
lete EPROM data.
Attention the device must
then be re-adjusted!
Pressing this key during
start up enters menu to.
activate / deactivate the
dryer device.
