TESTING 1.0366, Operating Manual

Page: 35 / 61

Multi Station
Vicat Test Apparatus
35
5.2.2 Setting the coordinates of the dryer
Setting or Readjusting the coordinates of the dryer unit is necessary when the cone does not hit the center
of the sponges-arrangement. The immersion depth of cone can also be readjusted.
Figure 35: selection window set coordinates of dryer?
Press
“1” button
to access the window for setting the dryer coordinates, e.g. that of the dryer on position
1 ( Figure 36 ).
Press
“2”
button to bypass the window for setting the dryer coordinates and go to the next window.
The next window will prompt you to set the coordinates of sample 1 ( Figure 37 ).
By repeatedly pressing the
“2” button
, you will be successive guided to the other windows for setting the
coordinates of the other samples until finally to the window for determination of zero levels.
Press
“3” button
if you want to go back to the previous window.
Press the
“C” button
to exit the special menu for setting the coordinates.
The machine performs a reference search and goes into readiness.
Figure 36: set coordinates of the dryer at position 1
To set the coordinates of the dryer unit proceed as follows:
Select an axis:
Press
button “1”
to select X-axis
Press
button “2”
to select Y-axis
Press
button “3”
to select Z-axis
Modify the coordinate of the selected axis by pressing:
Button “B”
moving towards reference point
Button “F”
moving away from reference point
Save the coordinates of the selected axis by pressing:
Button “E”
The coordinate is saved to the EEPROM and is immediately effective.
Quit the window to return to previous window by pressing:
Button
“C”
Dryer at Position 2
Set P2 coordinates?
yes: 1 back: 3
no: 2 cancel C
Dryer at Position 1
Set P1 coordinates?
yes: 1 back: 3
no: 2 cancel C
Set Pos1 coordinates
X: 1 B< F> E C
Y: 2 B< F> E C
Z: 3 B< F> E C