Laboratory mortar mixers
Model 1.0204.LV
27
13.4 Taking the mortar mixer out of operation
1. Switch off the MAIN SWITCH.
2. Disconnect the mortar mixer from the power supply
3. Cover the mortar mixer with the dust cover
4. Store the mortar mixer in a dry place
Warning
Safety note!
1. Work on electrical equipment may only be carried out by qual-
ified personnel!
2. In the event of a fault and/or before disassembling covers, pull
out the power plug!
Note
In the event of a fault, the mortar mixer must be disconnected from
the power supply. The IEC power connection has two safety fuses
(one for each speed). These can be checked and replaced with new,
identical safety fuses if necessary.
For further fault finding and the remedy of defects, please refer to our
detailed description of the control system and the electric wiring dia-
gram accompanying these operating instructions.
14. Disposal
To prevent damage to the environment, always ensure that the used mortar mixer is
only disposed of by authorized specialist companies or by the manufacturer.
