Laboratory mortar mixers
Model 1.0204.LV
17
7.3 Inserting the mixing bowl
The container holder is in the lowered position.
Insert the bowl so that the rear tab of the bowl first engages the rear of the recess in the
mounting.
Then set the bowl on the pins and fold the latches towards the bowl.
Figure 3Inserting and locking the mixing bowl
7.4 Insert the stirrer and clamp securely
Insert stirrer laterally at an angle into the mixing bowl. Turn the cord ring counterclockwise
as far as it will go. Position the stirrer under the holder so that the stud in the knurling
surface and the flat surface on the stirring ring are aligned. Insert the stirrer into the holder
as far as it will go and tighten the cord ring clockwise. Position the mixing bowl (lifting)
.
Figure 4Inserting and tightening the stirrer
Note
The mixer can not be started with the mixing bowl lowered or missing.
Stud
Surface on the
ring
