Laboratory mortar mixers
Model 1.0204.LV
21
9. Operation
9.1 Switching the mortar mixer on and off
Connect the power cable to the IEC power connection of the mortar mixer
and the socket.
Turn on the mortar mixer, the power switch lights up.
Figure 9 Power switch/Power connection/Fuses
9.2 Explanation of the control unit
If the mortar mixer is switched on and the mixing bowl is up, the mortar mixer can be
started at one of the two speeds.
Figure 10 Control panel
The mortar mixer is stopped by using the stop button.
Speed 1
Speed 2
Stop
Emergency stop but-
ton
After the EMERGENCY
STOP function has been
triggered, the operating
mode of the mortar mixer
can be restored by turning
the button in the direction
of the arrow.
Main switch
IEC power connec-
tion
Fuses
12,5A T
(Conrad 524108-02)
