MSR05-20200701
20
5.4 ÖHLINS PRC shock absorber for
SCARVER™
In sitskiing, it is necessary to adjust the strength of the
spring to the weight and the performance of the skier to
have a good quality suspension. This is why we
propose a wide range of springs. It is necessary to
change it if it doesn’t fit to the skier.
Figure 4:
ÖHLINS
PRC Scarver
Rebound
Screw in the clockwise against the shock
absorber (seen from the top) to reach 0 and
then unscrew from the required number of
“click”.
- 0 click: rebound closed, very slow return
- 15 clicks: Average adjustments
- 25 clicks: Maximal utile opening, very fast
return
(It is possible to open more than 25 clicks but
there is no impact anymore on its way to work.
To avoid dismantle, do not open much more
than 25 clicks)
IMPORTANT
The rebound value must always be
superior
or
equal
to
the
compression value
in order to let the
shock
absorber
uncoil
on
a
succession of shocks.
Compression
Screw in the clockwise against the shock
absorber to reach 0 and then unscrew from the
required number of “click”.
- 0 click: Closed, very hard
- 10 clicks: Average adjustment
- 21 clics: Open to the maximum, very supple
Harder
Softer
Slower
Faster
Pre-load
A 15mm pre-load is recommended for a good
work of the shock absorber.
See « Change of spring» chapter.
