Owner’s manual
55
EN
MOPPING FUNCTION
Installation of 2in1 tank
1. Attach the mopping pad to the
bottom of the 2in1 tank.
2. Before filling the tank, remove
the dustbin.
3. Then, open the rubber plug and fill
the tank with water. Afterwards, close
the plug tightly.
Note:
Fill the water tank only with clean
water. Do not add any detergents as they
may damage the water tank.
4. Reattach the dustbin and put its
handle into the slot.
5. Push the tank horizontally along the rear part of the appliance. The tank is installed
correctly in place if you hear a clicking sound.
