Tesla TA71FFUL-2432IAW, User Manual

Page: 5 / 252

5
ENG
Quantity of R290 gas in charge (see rating
label on the appliance) (g)
Minimum size of the site for use and storage
(m²)
m<152 4
152≤m≤185 9
186≤m≤225 11
226≤m≤270 13
271≤m≤290 14
WARNING : System contains refrigerant under very high pressure. The system must be serviced by qualified
persons only.
1. Transport of equipment containing flammable refrigerants (Annex CC.1)
Compliance with the transport regulations.
2. Marking of equipment using signs(Annex CC.2)
Compliance with local regulations.
3. Disposal of equipment using flammable refrigerants(Annex CC.3)
Compliance with national regulations.
4. Storage of equipment/appliances (Annex CC.4)
The storage of equipment should be in accordance with the manufacturer’s instructions.
5. Storage of packed (unsold) equipment(Annex CC.5)
Storage package protection should be constructed such that mechanical damage to the equipment inside the
package will not cause a leak of the refrigerant charge.
The maximum number of pieces of equipment permitted to be stored together will be determined by local
regulations.
6. Information on servicing(Annex DD.3)
1) Checks to the area
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure
that the risk of ignition is minimised. For repair to the refrigerating system, the following precautions shall be
complied with prior to conducting work on the system.
2) Work procedure
Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or
vapour being present while the work is being performed.
3) General work area
All maintenance staff and others working in the local area shall be instructed on the nature of work being
carried out. Work in confined spaces shall be avoided. The area around the workspace shall be sectioned off.
Ensure that the conditions within the area have been made safe by control of flammable material.
4) Checking for presence of refrigerant
The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the
technician is aware of potentially flammable atmospheres. Ensure that the leak detection equipment being