56
ENG
Remote controller inside
Signal transmitter
Open it from left to right
1.
ON/OFF button
Press this button,the unit will be started or stopped, which can clear the timer or sleeping function of last time.
2.
MODE button
Press this button, the running mode will change as below:
AUTO
COOL
DRY
HEAT
FAN
Note
: Cooling only unit has mo heating function.
3.
SPEED button
Press this button,speed will change as below:
Low
Mid
High
Auto
4.
TURBO button
• Set turbo on or off(the characters of turbo will appear or disappear)by pressing this key under cooling or
heating mode.
• Once energized, the unit will be defaulted to be turbo off.
• This function can not be set under auto, dry or fan mode, and characters of turbo won’t appear.
5.
SILENCE button
•
Set silence on or off(the characters of silence will appear or disappear)by pressing this key.
• Once energized, the unit will be defaulted to be silence off.
6.
TIMER button
• On the status of the unit on, press this button to set timer off. On the status of the unit off, press this button to
set timer on.
• Press this key once, words H on(off) will appear and flicker. In which case, press / button to adjust time
(press / button to change timing value quickly), the setting time range is from 0.5 to 24 hr. ; press this
key once again to fix the time, then remote controller will send out the signal immediately and H on/off will
stop flickering.
• If the time of that no press timer button under flickering status is above 10s, the timer setting will quit.
• If the timer has been set, press this button once again to quit it.
Summary of Contents for TA22FFML-07410A
Page 59: ......
Page 60: ...www tesla info ...
