Tesla RD2100M, User Manual

Page: 2 / 44

2
ENG
1.
WARNING
Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
2. WARNING Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
3. WARNING Do not damage the refrigerant circuit.
4. WARNING Do not use electrical appliances inside the
food storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
5. The appliance has to be unplugged after use and before
carrying out user maintenance on the appliance.
6. This appliance can be used by children aged from 8
years and above and persons with reduce physical
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
7. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
8. Please abandon the refrigerator according to local
regulators for it use flammable blowing gas and
refrigerant.
9. Please according to local regulations regarding disposal
of the appliance for its flammable refrigerant and blowing
gas. Before you scrap the appliance, please take off the
doors to prevent children trapped.
10. This appliance is intended to be used in household and
similar applications such as
– staff kitchen areas in shops, offices and other working
environments;
– farm houses and by clients in hotels, motels and other
residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
11. Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
SAFETY WARNINGS
INSTALLATION
Location
Reversing the Door Swing (optionnal)
Tools Required
: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner.
1. Remove the top hinge cover .
The top hinge coverr
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING
OF REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.
When selecting a position for your unit you should make sure
the floor is flat and firm, and the room is well ventilated. Avoid
locating your unit near a heat source, e.g. cooker, boiler or
radiator. Also avoid direct sunlight as it may increase the
electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor installation. Do
not drape the unit with any covering.
When installing the unit, ensure that 10 cm of free space is
left at both sides, 10 cm at the rear and 30 cm at the top of
the unit. This will allow cold air to circulate around the wine
cooler and improve the efficiency of the cooling process.