NOTE:
Regardless of the setting selected, the energy
gained by regenerative braking is reduced if the Battery
is full, or is extremely cold or hot (in which case, surplus
energy is used to heat or cool it).
NOTE:
The regenerative braking setting is not available
on all vehicles.
Stopping Mode
: Choose how you want Model Y to
behave once regenerative braking has reduced the
driving speed to a very low speed, Drive or Reverse is
still engaged, and both the accelerator and brake pedals
are released. See
. You can
adjust this setting only when Model Y is in Park.
Slip Start
(on Rear-Wheel Drive vehicles): Turn on to
allow wheels to spin (see
Off-Road Assist
(on All-Wheel Drive vehicles): Enable
Off-Road Assist to disable traction control and allow
wheels to spin when driving off-road (see
Trailer Mode
(available only if equipped with a tow
package): Must always be active when towing a trailer.
Some Autopilot features and rear sensor functionality
may not be available. See
Charging
View charging status and adjust settings related to
charging Model Y (see
Autopilot
NOTE:
Depending on market region, vehicle
configuration, options purchased, and software version,
your vehicle may not be equipped with all Autopilot
features described below.
Customize how some of the Autopilot features operate
to provide a safer and more convenient driving
experience. See
for an
overview of Autopilot components and features.
•
Autosteer (Beta)
: Turn on the feature that provides
automatic steering in addition to Traffic-Aware Cruise
Control (see
•
Navigate on Autopilot (Beta)
: Navigate on Autopilot
automatically exits at off-ramps and interchanges
based on your navigation route and can also make
lane changes designed to prepare for exits and
minimize the driving time to your destination
(available only if your vehicle is equipped with the
Full Self-Driving option). Touch
Customize Navigate
on Autopilot
to specify how you want Navigate on
Autopilot to operate, such as whether you want it to
automatically enable at the start of every trip, how
you want it to perform lane changes, etc. (see
Navigate on Autopilot on page 100
).
NOTE:
Navigate on Autopilot is not available in all
market regions.
•
Traffic Light and Stop Sign Control (Beta)
: Turn on if
you want Model Y to automatically stop at traffic
lights and stop signs when using Traffic-Aware Cruise
Control or Autosteer (see
) (available only if your vehicle is
equipped with the Full Self-Driving option).
•
Summon (Beta)
: Automatically park and retrieve
Model Y from outside the vehicle (see
) (available only if your vehicle is equipped
with the Full Self-Driving option).
Customize Summon
: Determine the bumper
clearance, distance, amount of side clearance, and
whether Summon requires continuous press to
operate (the ability to disable continuous press is not
available in all market regions).
Standby Mode
: Use Standby Mode to eliminate the
delay that occurs when Smart Summon (if equipped)
is starting up.
•
Set Speed
: When you engage Traffic-Aware Cruise
Control or Autosteer, choose whether you want the
initial cruising speed set to the
Speed Limit
or your
Current Speed
Traffic-Aware Cruise Control on
).
•
Offset
: When set to cruise at the speed limit, you can
choose a
Fixed
offset, in which the speed is adjusted
by a specific number of km/h on all roads, or a
Percentage
offset, in which the speed adjustment
varies depending on the detected speed limit of the
road.
•
Blind Spot Camera
: When
ON
, the touchscreen
displays the view from the corresponding side
repeater camera whenever you engage a turn signal
to change lanes. See
Blind Spot Camera and Collision
.
•
Blind Spot Collision Warning Chime
: Choose if you
want a chime to sound when a vehicle is in your blind
spot and a possible collision is detected (see
Spot Camera and Collision Warning Chime on page
•
Speed Limit Warning
: Choose the type of warnings, if
any, you receive if driving speed exceeds the
detected speed limit (see
•
Speed Limit
: Choose if you want
Speed Limit
Warning
to use a relative or an absolute speed limit
(see
). If you choose a
relative speed limit, you can specify an
Offset
to be
alerted only when you exceed the speed limit by the
specified offset amount.
•
Lane Departure Avoidance
: Choose if and how you
want the steering wheel to respond if a front wheel
passes over a lane marking when the associated turn
signal is off (see
).
Controls
125
Using the Touchscreen
