Tesla Larder RS0900H, User Manual, Page: 6 / 40

6
ENG
6
7 8 9
10
Refit the bracket fitting
the bottom hinge pin.
Replace both adjustable
feet.
7. Place the door back on.
Ensure the door is aligned
horizontally and vertically
so that the seals are closed
on all sides before finally
tightening the top hinge.
8. Insert the hinge bracket
and screw it to the top of
the unit.
9. Use a spanner to tighten it
if necessary.
Put the hinge cover and
the screw cover back.
Remove the top left
screw cover.
Move the core cover from
left side to right side. And
then lift the upper
door and place it on a
padded surface to prevent
it from scratching.
3
4
Unscrew and remove the bottom hinge pin, turn the bracket over
and replace it.
5
INSTALLATION
Install door external handle (if external handle is present)