![background image](http://html1.mh-extra.com/html/tesla/gen-3/gen-3_manual_1091193025.webp)
STEP 4: Sizing and Routing Conductor Wires
Pull excess wire first, then cut to length. Use a wire stripper to cut each conductor wire appropriately based
on entry point and position. Attach the conduit/fittings and route each conductor wire into the wirebox so it
lands in the correct terminal.
NOTE:
Insulation wire colors may vary based on market.
For Top Wire Entry
Wire lengths/proportions shown are not to scale.
For Bottom (1), Rear Left (2), or Rear Right (3) Wire Entry
Wire lengths/proportions shown are not to scale.
INSTALLATION STEPS
24
Gen 3 Wall Connector Manual
Summary of Contents for Gen 3
