background image

LIMITS OF LIABILITY

This Charging Equipment Limited Warranty is the only express warranty made in connection with your Tesla 
connector or adapter. Implied and express warranties and conditions arising under applicable local laws, 
federal statute or otherwise, in law or in equity, if any, including, but not limited to, implied warranties and 
conditions of merchantability or merchantable quality, fitness for a particular purpose, durability, or those 
arising by a course of dealing or usage of trade, or any warranties against latent or hidden defects, are 
disclaimed to the fullest extent allowable by your local law, or limited in duration to the term of this Charging 
Equipment Limited Warranty. To the fullest extent allowable by your local law, the performance of necessary 
repairs and/or replacement of new, reconditioned, or remanufactured parts by Tesla for the covered defects 
is the exclusive remedy under this Charging Equipment Limited Warranty or any implied warranties. To the 
maximum extent permissible under your local law, liability is limited to the reasonable price for repair or 
replacement of the applicable Tesla connector or adapter, not to exceed the manufacturer’s suggested retail 
price. Replacement may be made with parts of like kind and quality, including non-original manufacturer’s 
parts, or reconditioned or remanufactured parts, as necessary. This Charging Equipment Limited Warranty 
covers only parts and factory labor necessary to repair but does not include any on-site labor costs related 
to un-installing, reinstalling or removing the repaired or replacement charging equipment. Parts repaired or 
replaced, including replacement of a Tesla connector or adapter, under this Charging Equipment Limited 

Warranty are covered only until the applicable warranty period of this Charging Equipment Limited 
Warranty ends, or as otherwise provided by applicable law. Under no circumstances will the original 
warranty period be extended as a result of your Tesla connector or adapter being repaired or replaced.

Tesla shall not be liable for any defects under this Charging Equipment Limited Warranty that exceed the fair 
market value of the applicable Tesla connector or adapter at the time immediately preceding the discovery 
of the defect. In addition, the sum of all benefits payable under this Charging Equipment Limited Warranty 
shall not exceed the price you paid for the applicable Tesla connector or adapter.

Tesla does not authorize any person or entity to create for it any other obligations or liability in connection 
with this Charging Equipment Limited Warranty. Subject to local laws and regulations, the decision of 
whether to repair or replace a part or to use a new, reconditioned or remanufactured part will be made by 
Tesla, in its sole discretion. Tesla may occasionally offer to pay some or all of the cost of certain repairs that 
are not covered by this Charging Equipment Limited Warranty, either for specific models or on an ad hoc, 
case-by-case basis. Tesla reserves the right to do the above at any time without incurring any obligation to 
make a similar payment to other Tesla charging equipment owners.

To the maximum extent permissible under local law, Tesla hereby disclaims any and all indirect, incidental, 
special and consequential damages arising out of, or relating to, the Tesla connector or adapter, including, 
but not limited to, transportation to and from a Tesla Authorized Service Center, loss of the Tesla connector 
or adapter, loss of vehicle value, loss of time, loss of income, loss of use, loss of personal or commercial 
property, inconvenience or aggravation, emotional distress or harm, commercial loss (including but not 
limited to lost profits or earnings), towing charges, bus fares, vehicle rental, service call charges, gasoline 

expenses, lodging expenses, damage to tow vehicle, and incidental charges such as telephone calls, facsimile 
transmissions, and mailing expenses.

The above limitations and exclusions shall apply whether your claim is in contract, tort (including negligence 
and gross negligence), breach of warranty or condition, misrepresentation (whether negligent or otherwise), 
or otherwise at law or in equity, even if Tesla is advised of the possibility of such damages or such damages 
are reasonably foreseeable.

Nothing in this Charging Equipment Limited Warranty shall exclude, or in any way limit, Tesla’s liability for 
death or personal injury solely and directly caused by Tesla’s negligence, or that of its employees, agents or 
sub-contractors (as applicable), fraud or fraudulent misrepresentation, or any other liability to the extent the 
same is proven in a court of competent jurisdiction in a final nonappealable judgment and may not be 
excluded or limited as a matter of local law.

32

Gen 3 Wall Connector Manual 

Summary of Contents for Gen 3











































Reviews: