12
TELSTRA GATEWAY PRO
™
USER GUIDE
You will need a copy of your order completion email and your Wi-Fi Network Security Card to get started.
Your Gateway can be set up in
3 easy steps:
Step 1:
Connect the cables as in Figure 7 or Figure 8, depending on your connection type.
Step 2:
Connect your devices to the Gateway, either using an Ethernet cable or via Wi-Fi.
If you do have an NBN box at your premises you will have an NBN Fibre to the Premises (FTTP)
connection. You will need a copy of your order completion email and your Wi-Fi Network Security Card
to get started.
Step 3:
Activate your Internet service and voice service using the Setup Wizard.
For more detail on the Setup Wizard screens refer to section 3.1 of this Guide.
2.3. Setting up your Gateway with an NBN box (Fibre to the Premises)
How to:
Your Wi-Fi Network Security card contains the Network names and Network Key to connect
your devices to both the 2.4GHz and 5GHz bands.
How to:
The Setup Wizard can be accessed by either Ethernet or Wi-Fi by typing the Telstra default IP
address, 192.168.15.1, into your preferred browser. This will start the wizard and you can follow
the screens and prompts to complete.
Figure 9: Telstra Gateway Pro™ Setup for NBN (FTTP)