40
TELSTRA GATEWAY PRO
™
USER GUIDE
5.3. LAN IP Pool/DHCP Change
The Telstra Gateway Pro™ allows you to reconfigure the LAN IP pool if required. The following steps
outline how to configure the Gateway to suit existing devices connected on a complex network. If
you have an existing LAN IP range that does not match that of the Gateway’s default LAN IP pool
(192.168.15.1) the following will need to be completed to identify the required LAN IP range.
•
For Windows computers:
− Open a command prompt, type in
ipconfig
and press
enter.
− The number next to
Default Gateway
is your current router/gateway IP address.
•
For Apple computers:
− Access
System Preferences
and select
Network.
− Select the appropriate port (e.g. Ethernet / Airport) Click
Advanced
and then the
TCP/IP
tab.
− The number next to Router is your current router/gateway IP address.
Once you have noted down the new LAN IP address to be used, you are ready to update these details
into the Gateway. Complete the following steps to change the LAN IP pool it in the Gateway:
• Connect your computer to the Gateway via an Ethernet connection. To access the Gateway Control
Panel page go to
192.168.15.1
in your browser and navigate to
Advanced> Setup > LAN Setup.
Figure 49: LAN Setup
• Under
LAN TCP/IP Setup
change
the IP Address/IP Subnet Mask
to the new range.