28
A32 SERVICE LOGIN
Warning Service login active
A34 BYP ROTATE PHASE
Warning By-pass phase sequency incorrect
A35 INV STOP
Warning Inverter module interrupted
A36 INV DC DOWN
Warning DC BUS voltage is less then 120 volts DC
A37 AC CURR LIMIT
Warning Inverter output current limited
A38 FUSE FAILURE
Warning Any fuse in UPS is blowned
A39 PSP FAILURE
Alarm
Inverter control board power supply out of tolerant
A40 INVERTER START
Warning Inverter is in soft start stage wait for finish
A43 USER LOGIN
Warning User logged in to UPS
A45 SERV.PASSWORD
Fault
For UPS startup service password required
If any alarm shown on the LCD panel without A00 and R00 message UPS will start automatically if the
conditions are normal. But if you see A00 or R00 code with any alarm together you must CALL SERVICE !
If the message is warning UPS continues to run there is no problem.
To support technical service status cods are used, each status code tells different event to us.
Summary of Contents for DS300 Series
Page 1: ...DS300 SERIES DSP Controlled UPS 100 120 160 kVA 3 Phase In 3 Phase Out USER MANUAL...
Page 2: ......
Page 53: ......
Page 54: ...AGKK10632 09 2021...
