![background image](http://html.mh-extra.com/html/tesa/twin-surf/twin-surf_instruction-manual_1090548030.webp)
Instruction Manual for TESA TWIN-SURF
30
Send a code to the instrument:
Click on
to transfer to code in the instrument. First make sure your instrument is
connected.
When the code is on instrument, the logo
appear on the code view.
If you want to start the measurement from the software and store it in the appropriate code,
enable the code in the software by clicking on
. The code name will be displayed in the
main window.
Export measuring results to TESA DATA-STUDIO:
When measures are done, you can transfer the measurement in the software.
On the software, select the menu Code by clicking on
and synchronize all latest
measurements by clicking on
.
All new measurement for each codes are now available from the software. To display the new
measurements, click on the appropriation code name.
After the synchronization, the software asks you if you want to
remove the measurement
in
the internal memory of the instrument.
After the synchronization, the software asks you if you want to
remove the
measurement
in the internal memory of the instrument.
Statistics:
All measurement from a same code can be displayed on an EXCEL document to display the
Statistics values Min, Max, Average and
σ.
In the code you want, click on the 3 dots and select
Statistics
.
The EXCEL file will be automatically created.
Recalculation:
The recalculation allow to recalculate new parameters of a measurement made with
parameters that would have been forgotten.
To do this, define the new desired measurement parameters from the main menu of the
software.
Once defined, select the desired measurement and click on the icon
.
This procedure allows to add the new parameters in the existing measurement.
If the recalculation has been performed in a measurement included in a code, then all
measurements of the code will have the new parameters defined by the recalculation
The new parameters will appear in blue.
Rename a measurement :
In the measurement, click on the icon
to rename a measurement.