Instruction Manual for TESA TWIN-SURF
15
6.3 Measurement
standard
To change the measurement standard, enter the main menu and select the item
Set measure
with button
.
The following screen appear.
Press
to go in the
Standard
item and confirm with button
.
The following screen appear.
Go to the desired item with
and confirm by pressing
If ISO 428 has been selected, it is also possible to choose the unit of the measurement
between millimeters (mm) and inches (inch) by selecting the desired unit with
and
confirming with button
.
Press
to go back to
Set measure
screen.
If a code has already been selected, no parameter modification is available.
If you want to modify the parameters displayed with your code, proceed to
the code modification only through TESA DATA-STUDIO.
