Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 26 / 204

Pumps
There are four pumps located on the mounting plate, as shown in Figure 2-4. Table 2-4 describes the
function of each pump.
Figure 2-4: Location of the pumps
Table 2-4: Function of the pumps
Location Component Function
1 EC inlet pump Pumps fluid from an inlet bag to the EC circulation loop.
2 IC inlet pump Pumps fluid from an inlet bag to the IC circulation loop via the air
removal chamber (ARC).
3 IC circulation pump Pumps fluid in the IC circulation loop.
4 EC circulation pump Pumps fluid in the EC circulation loop.
Quantum System Components
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 2-7