20
/
49
2.2.18
RTKTIMEOUT
This command is used to set the maximum age (unit second) of RTK data to use when
operating as a rover station.
Table 21 RTKTIMEOUT
Name
Value
Command
RTKTIMEOUT delay
Example
RTKTIMEOUT 40
Function
Sets maximum age of RTK data
2.2.19
SAVECONFIG
This command is used to save current configurations to flash. The saved
configurations are still valid even if the board is rebooted.
Table 22 Save current configuration
Name
Value
Command
saveconfig
Example
saveconfig
Function
Save current configuration to flash
2.2.20
SERIALCONFIG
This command is to configure serial port settings.
Table 23 Configuring serial port settings
Name
Value
Command
SERIALCONFIG [port]baud[parity[databits[stopbits]]]
Example
serialconfig com1 9600 n 8 1
Function
configure serial port settings
Table 24 Serial port mode
Mode
Description
