12
/
49
Command
ANTENNAMODE option
Example
ANTENNAMODE DUALGPSBDS
Function
Parameter
Option
Specific which signals will be tracked by the two antennas.
DUALGPSBDS: Primary antenna tracks GPS L1/L2, BDS
B1/B2; secondary antenna tracks
GPS L1, BDS B2
DUALGPSGLO: Primary antenna tracks GPS L1/L2, GLO
G1/G2; secondary antenna tracks
GPS L1, GLO G2
0 (default): Primary antenna track GPS L1/L2, GLO G1/G2,
BDS B1/B2.
2.2.2
COM
This command is used to change the baud rate of the serial port to adapt its host
device requirement.
Table 4 Configuring serial port baud rate
Name
Value
Command
COM [port] bps
Example
COM COM1 115200
Function
change baud rate of a serial port
Parameter description
port
COM1/ COM2
bps
baud rate
9600/19200/38400/57600/115200/230400/460800/921600
2.2.3
DGPSTXID
This command is used to set the DGPS station ID value for the receiver when it is
transmitting corrections.
Table 5 Sets DGPS station ID
Name
Value
Command
DGPSTXID auto ID
Example
DGPSTXID auto 2
Function
Sets DGPS station ID
ID
limited four character string
