16
7c
DISASSEMBLING/ASSEMBLING TSU, STSU, TSU-R, TSEU-R, TSHPU CLAMP MODELS
- Open the clamp to its full extent.
- Remove the tension spring (9) in the case
of the 0,75 TSU, 1TS(E)U, 1,5 TSU, 2 & 3
TSEU first remove the retaining pin (10) in
the cam assembly (2).
- Remove the retaining pin (10) and the
cam pin (7).
- Take the retaining pin (10) out of the con-
necting piece (18) and remove the link pin
(17).
- Remove the lifting shackle (16).
- Push the connecting piece (18) in until the
shackle pin (6) can be removed through
the mounting hole.
- Remove the connecting piece (18) and the
cam assembly (2).
- Disassemble the lever (4) by removing the
retaining pin (10) and take the lock as-
sembly (3) out of the clamp.
- Remove the pivot (8) using a socket and
ring spanner.
- Clean all parts with a standard
degreasant.
- Grease all shackle pins with bearing
grease.
- Oil the spring if necessary.
- Assemble all the parts in reverse order.
- Always insert new original retaining pins (10) and do so with the aid of a hammer, com-
bination pliers and pin punch.
- Always fit a new pivot bolt (11) and nut (12).
- Always use original Terrier components when replacing parts.
- Remove any burr with a file.
8 OVERHAULING
At least once a year, or if occasioned by damage to the clamp, the lifting clamp should
be inspected, tested and if necessary overhauled by Terrier Lifting Clamps B.V. or another
recognized mechanical repair and service center. If in doubt refer to your supplier.
9 DISPOSAL
Once it has reached the end of its useful life, the clamp can be treated as scrap iron,
provided that the clamp is rendered unfit for use.
16
17
18
3
9
10
6
1
2
10
10
13
7
10
Detail : A
11
8
12
4
Detail : A
