15
English
retaining pin (10) and take the lock assembly (3) out of the clamp.
- Remove the pivot (8) using a socket and ring spanner.
- Clean all parts with a standard degreasant.
- Grease all shackle pins with a bearing grease.
- Oil the spring if necessary.
- Assemble all the parts in reverse order.
- Always insert new original retaining pins (10) and do so with the aid of a hammer, com-
bination pliers and pin punch.
- Always fit a new pivot bolt (11) and nut (12).
- When replacing parts always use original Terrier components.
- Remove any burr with a file.
7b DISASSEMBLING/ASSEMBLING TSMP, STSMP, TSEMP CLAMP MODELS
- Open the clamp to its full extent.
- Remove the tension spring (9); in the
case of the 0,75 TSMP, 1TS(E)MP,
1,5TSMP, 2 & 3 TSEMP first remove the
retaining pin (10) in the cam assembly.
- Remove the retaining pin (10) and the
cam pin (7).
- Remove the retaining pin (10) and the
link pin (14).
- Remove the lifting shackle (5).
- Push the fork (15) in until the shackle
pin can be removed via the mounting
hole (6).
- Remove the fork (15) and the cam as-
sembly (2).
- Disassemble the lever (4) by removing
the retaining pin (10) and take the lock
assembly (3) out of the clamp.
- Remove the pivot (8) using a socket and
ring spanner.
- Clean all parts with a standard
degreasant.
- Grease all shackle pins with bearing
grease.
- Oil the spring if necessary.
- Assemble all the parts in reverse order.
- Always insert new original retaining pins (10) and do so with the aid of a hammer, com-
bination pliers and pin punch.
- Always fit a new pivot bolt (11) and nut (12).
- When replacing parts always use original Terrier components.
- Remove any burr with a file.
Detail : A
Detail : A
14
10
3
15
9
10
4
10
1
6
2
5
11
8
12
