PHASE X24 (English)
19
9. Master
, this rotary encoder controls the levels of the analog outputs (Main and
Monitor). The output pair to be controlled can be selected via the Push function
(Main or Monitor or Main & Monitor). In addition, pressing and holding will mute the
channels currently being controlled. This can be used to switch back and forth be-
tween two monitor speaker sets for a direct comparison. This function is also
available via the Control Panel if ever the PHASE X24 FW isn't within reach.
10. Main and Monitor LED
,
indicates the output pair currently being controlled by the
master or muted. The following overview describes the operation and displays:
MAIN LED
MONITOR
LED
MASTER controls:
Press and hold MASTER:
on
off
MAIN OUT 1/2 level
MAIN OUT 1/2 muted
off
on
MONITOR OUT 3/4 level
MAIN OUT 3/4 muted
on
on
MAIN and MONITOR OUT level
MAIN and MONITOR OUT muted
flashing
off
MAIN OUT 1/2 muted
MAIN OUT 1/2 unmuted
flashing
on
MONITOR OUT 3/4 level, (note: MAIN
OUT remains muted)
MAIN and MONITOR OUT muted
off
flashing
MAIN OUT 3/4 muted
MAIN OUT 3/4 unmuted
on
flashing
MAIN OUT 1/2 level, (note: MONITOR
OUT remains muted)
MAIN and MONITOR OUT muted
flashing flashing
MAIN
and
MONITOR OUT muted
MAIN and MONITOR OUT unmuted
11. Headphone Level
, adjusts the volume of the headphone output. The signal from
Analog Output 3/4 (Monitor) is always available at the headphone output. The ac-
tual signal available there depends on the routing, which you can set up to suit
your needs in the Control Panel. For more information on routing, please see the
Control Panel chapter on
Â
page 27.
12. Headphone Out
, output for a 1/4" stereo headphone jack.
