PHASE X24 (English)
27
The PHASE Control Panel
The PHASE Control Panel is—beside the drivers—by far the most important piece of
software in the package. Here, depending on the requirements of each situation, you can
have total control of the audio interface, reduce volumes (take this literally!), route inputs
to any output or set the Master Clock values.
Note:
The functions and the position of the control elements are
as identical as possible under Windows and MAC OS. The follow-
ing illustrations correspond to the Windows version of the Control
Panel.
The Control Panel is quite intuitive and should not present beginners with major problems.
Nevertheless, the following section contains a number of explanations of the individual
function blocks.
The digital mixer
Mixer PHASE X24 FW.
Inputs (Analog In, Digital In)
Here you can control the levels of the individual input channels of the PHASE X24 FW in
the Digital Mixer. The individual sliders can be adjusted directly on the hardware mixer. A
separate fader is available for each mono channel. The individual channels can be joined
using the switchable stereo link function. The “Mute” buttons can be used to mute the
individual channels. “Digital In” is grayed out until a signal is applied to the digital input
and the Master Clock under “Output & Settings” is set to “External”.
