21
THERMOSTAT SETTING
When the room has reached the set temperature, turn the left knob anticlock wise
just till the heater turns off. The set temperature will be automatically maintained
constant by the thermostat.
After the use, remember to turn the product off, and disconnect it from the main
supply.
SAFETY PROTECTION
The thermostat will turn the machine off if it overheats.
Overheating can be caused by obstruction to the air intakes on the back of the
machine or the grill on the front. If this occurs please disconnect the machine or
the and allow it to cool for 10 minutes. Remove any obstruction and turn the
machine back on.
If the problem persists you should have the machine checked by a suitable
qualified electrician.
If the heater ceases to function, the most likely cause is that a no-self-resetting
thetmal cut-out operates which could be reset by disconnection of the supply,
mains. If there is still no function please follow the repair advice above.
CLEANING AND MAINTENANCE
There are no parts inside the machine that require your attention or servicing .
Do not try to open the outer case. By doing so you could damage the motor and
heating element and invalidate the warranty. If you have a problem with the
heater, or if the power cord gets damaged in any way , you must take the unit to
a suitably qualified engineer or electrical repair center.
Before cleaning the machine, please make sure it is disconnected from the
power supply, and has cooled down completely.
Never clean the product with water and do not let it get wet under any
circumstance.
